Applications:
For cross and long side cut of panels. With flow feed use if double Hogging, or against feed if the Hogger uses a scorer.
Machines:
Squaring and edge banding machines using top & bottom Hogger.
Materials:
Chipboard, MDF and plywood panels with or without veneer, or plastic coatings.
Technical Features:
Single sided sharpening with bevel. Positive tooth rake angle. Hogger segments with first tooth in PCD. Fitting mechanical or quick coupling Hydro sleeves.
Re-sharpening:
H 4 up to 6 times
H 5 up to 10 times
H 6 up to 13 times
Sawblades
Cutters
Hoggers
Router Bits
Accessories
